Inspiring Ideas through Real Use
Photo features Sculpted Ledgestone in Canyon Fog MS74.
Sleek, modern lines and perfect form in muted shades.
- * Special Order only.
- Suitable for interior and exterior vertical surfaces.
- Appropriate for use in exterior wall applications in both freezing and non-freezing climates when proper installation methods are followed.
- Not for exterior use below grade.
- Not for use in direct contact with pool chemicals or in wet areas such as showers.
Size Random 4" - 19" long by 1.5" - 6" high
Average Thickness Application Recommendation Coverage Aesthetic Characteristics 1.65" Dry Stack or
1/2" Grout Joint
150 sq. ft. per pallet, grouted; 130 sq. ft. per pallet, dry stacked RANDOM SHADE VARIATION
Extreme color and texture variation from piece to piece and within each piece for a random look. Look of final installation will be unique. Review range of product before making final selection.
Care should be taken to avoid smearing mortar on the surface of the veneers. Accidental smears should be removed using a dry whisk broom only after mortar has dried completely. Never use a wet brush or wire brush. Do not power-wash, sandblast, use acid or acid-based products. Dirt or other materials may be removed with a strong solution of granulated soap or detergent and water with a bristle brush. Do not use a wire brush as it will cause damage to the surface. Rinse immediately with fresh water. Regular maintenance requires rinsing the wall with water occasionally to remove dirt.
Density of Structural Lightweight Concrete: ASTM C-567
Freeze-Thaw/Efflorescence: ASTM C-67
Comprehensive Strength: ASTM C-192, C-39
Flexure Strength: ASTM C-348
Tensile Strength: ASTM C-190
Water Absorption: UBC Std. 15-5 & 32-12 Shear Bond Strength: ASTM C-482
Density of Structural Lightweight Concrete: 15 psf maximum
Freeze-Thaw/Efflorescence: Less than 3% mass loss in 50 cycles/None visible
Comprehensive Strength: Minimum of 1800 psi in 28 days
Flexure Strength: No more than 10% deviation
Tensile Strength: No more than 10% deviation
Water Absorption: 22% average maximum Shear Bond Strength: Minimum 50 psi
Light Commercial: Yes